How To Change Riding Mower Blades

If the blades on your riding mower aren’t cutting grass like they used to, it’s probably time to change them. Here’s the guide and tips on how to change riding mower blades.

First, park your mower on a level surface and turn it off. Next, engage the parking brake and remove the key.

Then, disconnect the spark plug wire from the spark plug to prevent the engine from accidentally starting. Now you’re ready to begin changing the blades.

First, remove the mower deck by disconnecting the deck lift lever. Next, remove the blade bolts with a wrench or socket. Be sure to keep track of which blade goes on which side of the deck.

Once the old blades are off, you can install the new ones. First, put the blade on the spindle, making sure that the blade is facing the correct direction. Then, tighten the blade bolt with a wrench or socket.

Repeat this process for the other blade. Finally, reattach the mower deck and engage the deck lift lever. Then, reconnect the spark plug wire to the spark plug.

You’re now ready to mow your lawn with brand new blades!

  • Park the riding mower on a level surface and turn off the engine
  • Raise the deck of the mower so that you can access the blades
  • Use a wrench to loosen the bolts that hold the blades in place
  • Remove the old blades and replace them with new ones
  • Tighten the bolts to secure the new blades
  • Lower the deck and start the engine
  • Test the blades by mowing a short distance

How to replace riding lawn mower blades… in 10 minutes!!

Correct lawn mower blade position

Most people don’t think about the blade on their lawn mower, but it is a crucial part of the machine. The blade is what cuts the grass, so it is important to make sure it is in the correct position. There are three positions for the lawn mower blade: up, down, and sideways.

The up position is used for transportation and storage. The blade should be in the down position when you are ready to mow your lawn. The blade should be in the sideways position when you are mowing around obstacles.

This position allows the blade to cut the grass without hitting the obstacle. It is important to make sure the blade is in the correct position before you start mowing. If the blade is in the wrong position, it can damage the lawn mower and cause it to not work properly.

How do you change blades on a riding lawn mower?

If you have a riding lawn mower, it’s important to know how to change the blades. Otherwise, you’ll be stuck with dull blades that make it difficult to cut your grass. Here’s a step-by-step guide to changing the blades on a riding lawn mower:

1. Park your lawn mower on a level surface and turn off the engine.

2. Disengage the blade control lever so that the blades are no longer spinning.

3. Raise the deck of the lawn mower so that you can access the blades.

4. Remove the old blades by unbolting them from the deck.

5. Install the new blades by bolting them into place.

6. Lower the deck and engage the blade control lever.

7. Start the engine and test the blades to make sure they’re spinning properly.

How do you remove a riding lawn mower blade without removing the deck?

If you need to remove your riding lawn mower blade but don’t want to remove the deck, there are a few easy steps you can follow. First, make sure the mower is turned off and the key is removed. Next, disconnect the spark plug wire so the mower can’t accidentally start while you’re working on it.

Now you can begin removing the blade. There are usually two bolts holding the blade in place, so use a wrench or socket to remove them. With the bolts removed, the blade should come right off.

If it’s stuck, you may need to tap it gently with a mallet to loosen it. Once the blade is off, you can inspect it for damage and sharpen it if necessary. To put the blade back on, simply reverse the steps you followed to remove it.

Be sure to tighten the bolts securely so the blade doesn’t come off while you’re mowing.

Which way do riding mower blade bolts turn?

Most riding mower blade bolts turn clockwise to loosen and counterclockwise to tighten. To be sure, consult your mower’s owner’s manual. If you don’t have the manual, you can usually find a diagram of the blade assembly under the mower deck.

The diagram will show you which way the blade bolts turn.

How do you change a blade on a riding mower tractor?

It’s important to keep your riding mower tractor in tip-top shape, and that includes changing the blade when it gets dull. Here’s how to do it:

1. Park the tractor on a level surface and turn off the engine. Remove the key and disconnect the spark plug wire to prevent accidental starting.

2. Raise the mower deck to its highest position.

3. Use a wrench to loosen the blade bolt and washer.

4. Remove the blade and inspect it for damage. If it’s damaged, replace it with a new one.

5. Reattach the blade, making sure the cutting edge is facing down.

6. Tighten the blade bolt and washer.

7. Reconnect the spark plug wire and lower the mower deck. Your riding mower tractor is now ready to mow!


If you want to keep your lawn looking sharp, you’ll need to change your riding mower blades every few months. It’s a simple process that only takes a few minutes by following the guide we’ve shared in this blog post.